Benro B1 Triple Action Ball Head

Professional ball head Benro series "B". The heads are made of magnesium alloy, to maintain maximum performance, load capacity and low weight. Benro B professional ball heads are compatible with the worldwide Arca-Swiss system. For portrait photography, the head is cut on one side to allow a 90 ° tilt.

The control of the head is very simple and intuitive, which is helped by three main controls.

• Pan Lock (smallest rotary control) - control for locking the horizontal plane. For precise adjustment, the head is calibrated in 15 ° increments.
• Friction Control - control for setting the minimum friction of the head
• Ball Lock (largest rotary knob) - a knob designed to fully tighten the head

The quick release plate release controller is equipped with the P&T Safety System. This safety system is a safety device against unintentional loosening and falling of the quick-release plate from the base of the head.

Benro PU quick-release plates are rubberized at the top, and have two stop screws at the bottom to prevent accidental falling out.

At the top of the base for the quick-release plate, there is a clearly visible and legible spirit level for precise plane adjustment.

Benro heads are attached to tripods with a standard 3/8 "thread.

You can choose from a whole range of professional Benro ball heads series "B" B00, B0, B1, B2, B3, B4, B5.