Nissin Air10s Wireless TTL Commander for Fujifilm Cameras

• NAS - Nissin Air System, wireless radio mode
• For DSLR: Canon, Four Thirds / Micro Four Thirds, Fujifilm, Nikon, Sony (MI socket)
• TTL, M, Zoom
• 2.4 GHz
• Range: 100 m
• 8 channels
• 8 groups A, B, C, D and Ȧ, Ḃ, Ċ, Ḋ *
• Capture (5 byte) of the flash pairing ID
• Rotary program selector
• HSS synchronization with fast shutter speeds
• Synchronization on the 1st and 2nd shutter blades
• AF-assist illuminator
• Compatible with Di700A, i60A and Air R receiver

The range of the Air10s control unit is 100 m. 8 operating channels are available to prevent interference and incorrect firing by other users or devices operating on the same frequency. The Nissin Air10s control unit can control 8 flash groups A, B, C, D and Ȧ, Ḃ, Ċ, Ḋ. *

The Air10s NAS (Nissin Air System) control unit can be used with Di700A and i60A (NAS Ready) flashes without any receiver. The Di700A and i60A flashes have a built-in NAS radio receiver. For other Nissin flash models and genuine Canon flash units,
Nikon and Sony must use a Nissin Air R radio receiver.

Air las New standard - Nissin Air1Os

Advanced 2.4GHz wireless TTL flash control unit

Nissin Air10s is a wireless radio 2.4GHz TTL flash control unit NAS (Nissin Air System) for Canon, Fujifilm, Nikon, Four Thirds / Micro Four Thirds and Sony systems.

Air10s is an advanced flash control unit for NAS (Nissin Air System) * 1. The simple, clear layout of the controls and the color LCD display allow the user to quickly and easily control a large group of flashes even in critical lighting conditions, such as in a dark studio or in a brightly lit exterior. The unit is designed for wireless flash control compatible with NAS system (i60A and Di700A) and Nissin Air R receiver.

Easy firmware update via Micro SD card
The Air1Os is equipped with a Micro SD card slot that allows the user to upgrade the unit's firmware. Nissin plans to place a Micro SD card slot on all upcoming flash units and control units.

Flash control up to 100 meters * 2 * 4
The range of the transmitter was significantly extended (compared to the previous Air 1 model) to 100 meters. The unit allows remote control of TTL mode, short-time flash (FP) synchronization up to 1 / 8,000 s, second-blade synchronization and other functions.

Fine power adjustment
TTL exposure compensation in 1/3 EV step * 3
minimum flash output 1/256 of maximum output in manual mode
In TTL mode, settings can be adjusted in 1/3 EV increments. In manual flash mode, the unit supports reduction of flash output up to 1/256 of the maximum value.

Instant flash setting
TTL exposure data transferred immediately to manual mode
The unit has a "TTL memory function" that stores the flash exposure value during TTL shooting and allows you to switch to manual flash mode at the touch of a button. The device takes exposure data from TTL mode, calculates individual output internally, and transforms exposure data into manual flash mode. This can save you time when setting up the flash.

Maximum freedom
"Open mode" * 5 allows you to pair multiple Air10s with the same group of flash units
"Open mode" allows multiple Air1Os to be paired with the same flash group. This handy feature allows multiple cameras and Air1Os to be shared with the same NAS flash group. No need to re-pair. The same settings can be used for continuous shooting when replacing cameras.

Combined control
full compatibility of different versions of NAS flashes
Even if your Air10s is designed for Sony devices, for example, it can be paired with Nissin NAS flashes in Canon, Fujifilm, Four Thirds / Micro Fourthirds or Nikon versions while maintaining all functions, including TTL mode. Applies to Di700A and i60A only.

* 1 NAS, Nissin Air System, Nissin's original TTL wireless communication system, which was developed for radio transmissions in the 2.4 GHz frequency band, allowing stable operation of Slave Speedlights in outdoor or noisy environments. The devices are pre-paired to ensure stable communication with each other. 8 channels are available to ensure a secure communication environment.
* 2 Depending on the environment.
* 3 Supported for i60A flashes only. When the unit is paired with a Di700A flash unit or an Air R unit, the TTL mode allows a step of 1/2 EV (range -2 - + 2 EV), a manual flash mode of 1 / 1-1 / 128 power setting, a step of 1 EV.
* 4 For Canon devices set to "Mode II", the second-blade sync function cannot be used.
* 5 When used in "open mode", the NAS flash firmware needs to be updated.

Technical specifications

* 6 8 groups and modeling lighting are functions for upcoming Nissin products. They do not apply to current models.