Peak Design Anchor Mount

Attach the Peak Design strap (or any other photo neck strap) directly to the bottom of the camera - in the least conspicuous and obstructive way. Unlike the tripod plate, the Anchor Mount is so small and thin that it does not prevent access to the battery, card or manipulation of the tilting display. If you attach one end of the strap to the Anchor Mount, the camera will hang with the lens facing down, which is a very stable and comfortable way to wear, especially when using larger and heavier lenses. Extreme strength - made by machining from one piece of aluminum alloy and anodized. Remember that Anchor Mount is not compatible with a tripod or Capture mount.

• 1 from the side, 1 from below We often recommend attaching 1 end of the PD strap to the side eye of the camera (on the other side than the handle) and the other end from below. When using these 2 connection points, the camera hangs with the lens facing downwards, which ensures greater comfort and stability, especially with longer fixed lenses and zoom lenses. Anchor Mount is the smallest and least interfering connection adapter for PD Anchor anchors as well as standard straps for cameras.
• Compatible with all Peak Design straps By attaching Anchor anchors to the Anchor Mount on the bottom of the camera, you get new ways to carry the camera. Compatible with all versions of our Anchor anchors and straps.
• Compatible with all other straps You can attach any standard neck or wrist strap to the Anchor Mount. It is compatible with straps whose ends are max. 11 mm wide.
• Resistant to twisting Ultra strong and secure screw (4mm Allen key) with anti-slip washer.
• For each camera Can be screwed into a standard 1/4 ″ -20 tripod thread.
• Ultra strong Extreme strength and durability - made by machining from a single piece of aluminum alloy and anodized.
  
  Note: Anchor Mount is not compatible with tripods or Capture mount. If you often use a tripod or Capture, take a look at our standard plate.

Peak Design Anchor Mount plate specifications

• Material: Anodized aluminum alloy, anti-slip pad made of hard rubber, 4mm Allen screw made of stainless steel.
• Weight: 18 g (36 g pack)
• Size: 30mm x 20 mm x 5 mm
• Strap width: The strap can be attached to a width of 11 mm
• Load capacity: at least 90kg
• Warranty: Lifetime