VANGUARD VEO CSMM2 adjustable sled rails for accessories-double hot shoe holder
VEO CSMM2 Expandable Double Cold Shoe Mount allows you to attach two accessories with a base for Cold Shoe Mount to the hot shoe holder on your camera. It is suitable for any camera holder. Attach two accessories with a base for hot shoe mounting, such as VEO CSM or VEO CSM DLX, to the top plate. There is a 1/4" threaded hole on the front of each hot shoe holder for a suitable support arm for the tripod. It expands up to a width of 8.2". The bottom rotating wheel ensures a secure grip with the shoe holder. 4.7" width x 2.2" height. 1/4" threaded hole on the base. CNC machined aluminum. VEO CSMM2 allows you to mount two accessories with a base for flash mounting and adjust the width up to 8.2". If your accessory base requires a 1/4" thread, you can use VEO CSM or VEO CSM DLX for attachment. To attach the camera, simply slide it into the sled holder and tighten the bottom disc using the supplied Allen wrench for a secure grip. To attach it to your accessory, simply slide the accessory into the chosen hot shoe holder and tighten the locking knob on the VEO CSMM2. You can adjust the width of the shoe mount bar inward or outward up to 13.5 cm for optimal position or balance. Simply lift the safety latch to release the plate, adjust it to the desired position, and turn the latch back down to secure it. At the end of each bar, there is a small protruding button that prevents the hot shoe holders from falling off the end. There is a 1/4" thread on the front of each hot shoe holder, allowing you to attach any suitable support arm, such as Vanguard Tripod Support Arms, and add additional accessories. There is also a 1/4" thread on the base for attaching to any suitable support arm instead of the camera holder.
