The Falcon Eyes CBH-2 Clamps can be used to create a full background system
suitable for 2 backgrounds in combination with 2 light stands and a transverse bar.
The CBH-2 clamps may also be used to extend an
existing background device, adding 2 additional background rolls or cloths.
The copper pin is 53 mm long, and is 10 mm in diameter. The clamps fit a maximum diameter of 35 mm. The length from this pipe to the pin is 66 mm. The clamp is attached with a screw, and spigots (3/8 "male thread) can be substituted for the copper pin, allowing you to install extra lamps on the frame. The clamp is fitted with rubber which minimizes the risk of damaging your light tripod.
