Kenko KFM-1100 Auto Digi Meter

32 points to the loyalty system
Availability
Product is no longer available
Manufacturer
Kenko
Product code
785274

User-friendly exposure meter for reading permanent and flashing light. The exposure meter is controlled by front and side buttons located on the ergonomically shaped body of the device so that it can be operated with one hand only. ... Read More

  • Simple and easy to use ambient/flash light meter
  • Accurate and full-featured functions
  • "Analysis" function for mixed lighting
  • Flash ratio and ambient ratio calculations
  • Wired or wireless operation
  • Kenko KFM-1100 is a user-friendly and ergonomically designed light exposure meter for sensing ambient and flash light. This simple and reliable exposure meter is ergonomic to hold and logically designed, with a minimum of confusing buttons.

 

As a flash meter, the KFM-1100 can be used with or without a sync cable. The exposure meter has an aperture range of F / 1.0 - f / 128. As an additional bonus, the flash and ambient lighting can be analyzed to determine the lighting ratio of each scene. This function is very suitable for scenes in which the flash is used to "open" an area of ​​shadow leaving ambient (natural) light.

 

The instrument's "Calculation" function can be used to measure the average measurements that have been stored in memory, which is very useful when measuring reflected light to capture more accurately the details of both light and dark scenes.

 

The KFM-1100 can store 2 measurements, which can be called up as a reference or for averaging. After each reading, press the "M" button to store it in memory. If the memory has two stored data, it deletes the oldest read and stores the current information.

 

Measuring system: Spherical ball diffuser; silicon photocell

Measuring modes

  • Ambient - Ambient light
  • Cable - flash with sync cable
  • Cordless flash without sync cable
  • For 40 ° reflected light: F1.0 to 90 + 0.9 EV steps
  • For 5 ° spot viewfinder: F1.0 to 90 + 0.9 EV steps

 

Spherical head: rotation

Aperture and time priorities: Yes

ISO range: 3 - 8000

Shutter speed - ambient 1/8000 - 30 minutes

Shutter speed - flash 1 to 1/1000 second

EV range (ISO-100) -17 to 40.8 (0.1 step increments)

Cine speed: 8-128 frames / s

Exposure memory: Stores 2 measurements that can be recalled as a reference or for averaging

Shadow / Highlight Calculation -10 to +10 (0.1 steps); Analog scale: F 1.0 to 90 (1/2 step)

Brightness difference 1.0 to 90 (1/2 step)

Ambient flash: 0 to 100% in 25% increments

Power supply: One "AA" battery (not included);

Battery life: approximately 50 hours in ambient light measurement mode

Dimensions: 57 x 157 x 26 mm

Weight: 135 g (without battery)

Kenko KFM-1100 Auto Digi Meter