Kenko KFM-2200 is a user-friendly exposure meter for measuring permanent and flashlight. The exposure meter is controlled by front and side buttons located on the ergonomically shaped body of the device so that it can be operated with one hand. ... Read More
- measures incident and reflected light
- for use with both digital and film cameras
- setpoints can be measured for 3 parameters: aperture, shutter speed, ISO
- backlit display
- when used with a flat diffuser, it can be used as a simplified lux meter
- for spot metering, the exposure meter uses an optical system that eliminates the shift of the measured area, which varies according to the distance from the object
- thanks to the "latitude" function, the results of both incident and spotlight measurements can be displayed simultaneously
- Up to 10 measurements can be stored in memory, from which the exposure meter determines the average exposure and the deviation from the standard exposure
Specifications:
Type: Handheld digital exposure meter for measuring ambient and flashlight
Measuring methods: Incident and reflected light
Receptors:
incident light: 270 ° diffuser
spot reflected light: angle 1 °
Measuring modes:
AMBI - ambient light
CORD - flash using a sync cable
NON-CORD - flash without sync cable (only for measuring incident light)
Measuring range:
ISO100
Continuous light: incident EV -2.0 to 19.9
reflected: EV 2.0 to 24.5
Flashing light: incident F 1.0 to 128 +0.9
reflected F 2.8 to 128 +0.9
Measuring distance: 1.3 m to infinity
View-finder:
Type: single-eyed with a fixed focus
Magnification: 1.2x
Viewing angles: 12 ° (vertical) X 17 ° (horizontal)
Dioptre correction range: -3.0 to +1.0
Range:
Exposure: F 1.0 to 128 +0.9 (in 0.1 steps)
EV: -17 to 40.9 (in 0.1 steps)
Shutter speed (permanent light): 30min. up to 1/16000 sec.
Shutter speed (flashlight): 30min. up to 1/11000 s
Frame rate: 2 to 360
ISO: 3 to 8000 (1.3EV each)
Other functions:
Latitude display function
Light Ratio Analyze function
Memory function (up to 10 measurements)
S / A / H Exposure Calculation function
Brightness difference function
Exposure correction function: -10 to +10 (0.1 stop increments)
Power supply: 1x AA battery, which lasts approximately 30 hours of device operation
Working environment:
Temperature: -20 ° C to + 55 ° C
Humidity: max 85% at 35 ° C (no condensation)
Dimensions: 66mm x 175mm x 31mm
Weight: 185g without battery