VANGUARD VEO CSMM3 adjustable sled mount for accessories - Triple hotshoe holder
VEO CSMM3 allows you to mount three accessories with a base for attaching a hotshoe to the tripod's carrying arm and adjust the angle of the side hotshoe holders from +90° to -90°. It is suitable for any tripod carrying arm with a 1/4" thread (recommended models are VEO TSA DLX with a bayonet attachment). It is suitable for a camera sled holder using a suitable hotshoe holder, such as VEO CSM or VEO CSM DLX. Attach three accessories with a 1/4" threaded hole to the top plate of VEO CSMM3, which is suitable for a tripod support arm. The angle of the two side hotshoe holders can be adjusted from +90° to -90°. 3.5" width (extended) x 0.9" height CNC machined aluminum VEO CSMM3 allows you to mount three accessories with a base for attaching a hotshoe to the tripod's carrying arm and adjust the angle of the side hotshoe holders from +90° to -90°. If your accessory base requires a 1/4" thread or you want to attach this multi-mount hotshoe holder to the hotshoe holder on your camera, you can use VEO CSM or VEO CSM DLX. To attach it to a tripod support arm, simply screw a 1/4" thread into the base of VEO CSMM3. Even if it required any 1/4" thread to avoid unscrewing the hotshoe holder when in use, we recommend using a tripod carrying arm with a bayonet attachment, such as the VEO TSA DLX model. To attach it to your accessory, simply slide the accessory into the chosen cold shoe holder and tighten it appropriately. Then, you can adjust the angle of each side hotshoe holder by 180° (+90° to -90°) and lock the position using an Allen key. On the front of the hotshoe holder, there is a 1/4" thread that allows you to attach additional suitable support arms, such as one of Vanguard's support arms, and add more accessories. Folding to a width of 2.4" (or up to 3.5" maximum width), this triple hotsh
